LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2014 >> XK Base, 2D Coupe >> Repair and Diagnosis >> Suspension >> Electronic Suspension >> Vehicle Dynamic Suspension -- XK/X150 >> Vehicle Dynamic Suspension >> Adaptive Damping Module - 2-Door >> Removal And Installation >> Installation

Removal And Installation: Installation

  1. Install the active damping module.
    • Tighten the nuts to 10 Nm (7 lb.ft).
    • Connect the electrical connectors.
  2. Install the rear seat backrest.

    For additional information, refer to: REAR SEAT BACKREST (Removal and Installation).

scientia non olet · About LEMON Manuals