Removal And Installation: Installation

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2015 Jaguar XKR-S, 2015 Jaguar XKR, 2014 Jaguar XKR-S, 2014 Jaguar XKR, and 2013 Jaguar XKR-S. However, it is still accessible from the selected car via links, so may be relevant.

CAUTION:
- Install all the bolts finger tight before final tightening.
- Make sure that the area around the component is clean and free of foreign material.
- Install the new seals.

NOTE: Tighten the bolts in the indicated sequence.

Fig 1: Oil Cooler Mounting Bolts Tightening Sequence

Courtesy of OF JAGUAR CARS INC

To install, reverse the removal procedure.