Removal And Installation: Installation
WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2015 Jaguar XKR-S, 2015 Jaguar XKR, 2014 Jaguar XKR-S, 2014 Jaguar XKR, and 2013 Jaguar XKR-S. However, it is still accessible from the selected car via links, so may be relevant.
-
To install, reverse the removal procedure.
-
If required, carry out a short drive cycle.
Refer to: Powertrain Control Module (PCM) Short Drive Cycle Self-Test
CAUTION:
Make sure that the mating faces are clean and free of foreign material.
NOTE:
Lubricate the O-ring seal with clean engine oil.
NOTE:
For NAS vehicles only.