LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2014 >> XK Base, 2D Coupe >> Repair and Diagnosis >> External Pages >> Different car >> Section 9 (Vehicle Dynamic Suspension) >> Vehicle Dynamic Suspension >> Removal And Installation >> Adaptive Damping Module - 2-Door >> Removal

Adaptive Damping Module - 2-Door: Removal

WARNING: This page is about a different car, the 2011 Jaguar XKR, 2011 Jaguar XK, 2010 Jaguar XKR, and 2010 Jaguar XK. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the rear seat backrest. Refer to Rear Seat Backrest information.
  2. Remove the active damping module.
    • Remove the 4 nuts.
    • Disconnect the 2 electrical connectors.
      GJ0009489
scientia non olet · About LEMON Manuals