LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2014 >> XK Base, 2D Coupe >> Repair and Diagnosis >> External Pages >> Different car >> Section 9 (Vehicle Dynamic Suspension) >> Vehicle Dynamic Suspension >> Removal And Installation >> Adaptive Damping Module - 2-Door >> Installation

Adaptive Damping Module - 2-Door: Installation

WARNING: This page is about a different car, the 2011 Jaguar XKR, 2011 Jaguar XK, 2010 Jaguar XKR, and 2010 Jaguar XK. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the active damping module.
    • Tighten the nuts to 10 Nm (7 lb.ft).
    • Connect the electrical connectors.
  2. Install the rear seat backrest. Refer to Rear Seat Backrest information.
scientia non olet · About LEMON Manuals