LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2014 >> XK Base, 2D Coupe >> Repair and Diagnosis >> External Pages >> Different car >> Section 89 (Engine - V8 S/C 5.0L Petrol) >> Engine (V8 S/C 5.0L Petrol) >> Removal and Installation >> Oil Cooler >> Installation

Oil Cooler: Installation

WARNING: This page is about a different car, the 2011 Jaguar XKR175, 2011 Jaguar XKR, and 2010 Jaguar XKR. However, it is still accessible from the selected car via links, so may be relevant.
    CAUTION:

    Install all the bolts finger tight before final tightening.

    Make sure that the area around the component is clean and free of foreign material.

    Install the new seals.

    NOTE: Tighten the bolts in the indicated sequence.
  1. To install, reverse the removal procedure.
    GJ0012838
scientia non olet · About LEMON Manuals