Engine Mount RH: Removal
WARNING: This page is about a different car, the 2011 Jaguar XKR175, 2011 Jaguar XKR, and 2010 Jaguar XKR. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Removal steps in this procedure may contain installation details.
All vehicles
- Refer to: BATTERY DISCONNECT AND CONNECT .
- Raise and support the vehicle.
- Refer to: AIR DEFLECTOR .
- Support the engine with the lifting equipment.
- See figure.
- Torque: 35 Nm
- Torque: 100 Nm
- Torque: 10 Nm
- Torque: 63 Nm
- Torque: 48 Nm
- Torque: 48 Nm
WARNING:
Do not work on or under a vehicle supported only by a jack. Always support the vehicle on safety stands.
CAUTION:
Support the engine on a jack. The angle may need to be adjusted during this procedure.
Right-hand drive vehicles
NOTE:
Note the fitted position.
All vehicles
NOTE:
Do not disassemble further if the component is removed for access only.