LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2014 >> XK Base, 2D Coupe >> Repair and Diagnosis >> External Pages >> Different car >> Section 89 (Engine - V8 S/C 5.0L Petrol) >> Engine (V8 S/C 5.0L Petrol) >> Removal and Installation >> Crankshaft Front Seal >> Removing

Crankshaft Front Seal: Removing

WARNING: This page is about a different car, the 2011 Jaguar XKR175, 2011 Jaguar XKR, and 2010 Jaguar XKR. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Removal steps in this procedure may contain installation details.
  1. Refer to: BATTERY DISCONNECT AND CONNECT .
  2. Refer to: Crankshaft Pulley  .
    3. CAUTION: Do not over tighten the crankshaft front seal. Failure to follow this instruction may result in damage to the vehicle.
  3. Special Tool(s): 303-1434
    GJ0012780
scientia non olet · About LEMON Manuals