LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2014 >> XK Base, 2D Coupe >> Repair and Diagnosis >> External Pages >> Different car >> Section 80 (Parking Aid) >> Parking Aid >> Removal And Installation >> Front Inner Parking Aid Sensor >> Removal

Front Inner Parking Aid Sensor: Removal

WARNING: This page is about a different car, the 2011 Jaguar XKR, 2011 Jaguar XK, 2010 Jaguar XKR, and 2010 Jaguar XK. However, it is still accessible from the selected car via links, so may be relevant.

    All vehicles 

    WARNING: Do not work on or under a vehicle supported only by a jack. Always support the vehicle on safety stands.
  1. Raise and support the vehicle.

    2. Vehicles with 4.2L engine 

  2. Remove the front bumper cover. Refer to Front Bumper Cover - 4.2L information.

    3. Vehicles with 5.0L engine 

  3. Remove the front bumper cover. Refer to Front Bumper Cover - 5.0L information.

    4. All vehicles 

  4. Remove the parking aid sensor.
    • Disconnect the electrical connector.
    • Release the 2 clips.
      GJ0010673
scientia non olet · About LEMON Manuals