LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2014 >> XK Base, 2D Coupe >> Repair and Diagnosis >> External Pages >> Different car >> Section 79 (Warning Devices) >> Warning Devices >> Removal And Installation >> Low Washer Fluid Warning Indicator Switch >> Installation

Low Washer Fluid Warning Indicator Switch: Installation

WARNING: This page is about a different car, the 2011 Jaguar XKR, 2011 Jaguar XK, 2010 Jaguar XKR, and 2010 Jaguar XK. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install a new seal.
  2. Install the low washer fluid warning indicator switch.
    • Connect and secure the electrical connector.
  3. Install the fender splash shield. Refer to Fender Splash Shield information.
  4. Refill the washer reservoir.
scientia non olet · About LEMON Manuals