Audio Unit: Removal

WARNING: This page is about a different car, the 2011 Jaguar XKR, 2011 Jaguar XK, 2010 Jaguar XKR, and 2010 Jaguar XK. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: This component is easily recognized as a CD multichanger, it is however an audio module and links to the MOST.

Disconnect the battery ground cable. Refer to Specifications information.
Remove the navigation screen module. Refer to Navigation System Display Module information.
Release the audio/CD module and climatic control assembly.
- Remove the 4 module bracket Torx bolts.

CAUTION: Care must be taken to avoid damage to the mating surfaces.

Separate the climatic control and audio/CD module from the module bracket.
- Remove 2 Torx screws securing the navigation screen to the climatic control assembly.
- Remove the 4 Torx bolts.
Remove the CD unit.
- Remove the 2 Torx screws.