LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2014 >> XK Base, 2D Coupe >> Repair and Diagnosis >> External Pages >> Different car >> Section 76 (Heating & Ventilation) >> Heating And Ventilation >> Removal And Installation >> Blower Motor >> Removal

Blower Motor: Removal

WARNING: This page is about a different car, the 2011 Jaguar XKR, 2011 Jaguar XK, 2010 Jaguar XKR, and 2010 Jaguar XK. However, it is still accessible from the selected car via links, so may be relevant.
    CAUTION: Removal of the clips is a delicate procedure, damage will occur if any force is used.
  1. Remove the passenger side footwell trim panel.
    • Remove the 3 clips.
      GJ0009301
  2. Remove the blower motor.
    • Disconnect the electrical connector.
    • Remove the 3 screws.
      GJ0009569