LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2014 >> XK Base, 2D Coupe >> Repair and Diagnosis >> External Pages >> Different car >> Section 76 (Heating & Ventilation) >> Heating And Ventilation >> Removal And Installation >> Auxiliary Coolant Flow Pump >> Removal

Auxiliary Coolant Flow Pump: Removal

WARNING: This page is about a different car, the 2011 Jaguar XKR, 2011 Jaguar XK, 2010 Jaguar XKR, and 2010 Jaguar XK. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Removal steps in this procedure may contain installation details.
    WARNING: Do not work on or under a vehicle supported only by a jack. Always support the vehicle on safety stands.
  1. Raise and support the vehicle.
  2. Refer to ENGINE COOLING (V8 5.0L PETROL/V8 S/C 5.0L PETROL) or SUPERCHARGER COOLING (V8 S/C 5.0L PETROL) information.
  3. Refer to Radiator Splash Shield information.
  4. Refer to Auxiliary Radiator information.
  5. See figure
    GJ0025493
  6. See figure
    GJ0025282
  7. Torque: 7 Nm
    GJ0025494
scientia non olet · About LEMON Manuals