LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2014 >> XK Base, 2D Coupe >> Repair and Diagnosis >> External Pages >> Different car >> Section 76 (Heating & Ventilation) >> Heating And Ventilation >> Removal And Installation >> Auxiliary Coolant Flow Pump >> Installation

Auxiliary Coolant Flow Pump: Installation

WARNING: This page is about a different car, the 2011 Jaguar XKR, 2011 Jaguar XK, 2010 Jaguar XKR, and 2010 Jaguar XK. However, it is still accessible from the selected car via links, so may be relevant.
  1. To install, reverse the removal procedure.
    2. NOTE: For NAS vehicles only.
  2. If required, carry out a long drive cycle. Refer to Powertrain Control Module Long Drive Cycle Self-Test information.
scientia non olet · About LEMON Manuals