Fuel System Pressure Release: Draining
WARNING: This page is about a different car, the 2011 Jaguar XKR, 2011 Jaguar XK, 2010 Jaguar XKR, and 2010 Jaguar XK. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the fuel pump fuse.
- Remove the fuel filler cap.
- Start the engine and allow it to idle until the engine stalls.
- Crank the engine for approximately five seconds to make sure that the fuel rail pressure is released.
CAUTION:
When depressurizing the fuel system, make sure that there is no throttle input. Failure to follow this instruction may cause damage to the vehicle.