LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2014 >> XK Base, 2D Coupe >> Repair and Diagnosis >> External Pages >> Different car >> Section 71 (Fuel Charging & Controls (V8 5.0L Petrol)) >> Fuel Charging And Controls (V8 5.0L Petrol) >> Removal And Installation >> Throttle Body >> Removal

Throttle Body: Removal

WARNING: This page is about a different car, the 2011 Jaguar XK and 2010 Jaguar XK. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Removal steps in this procedure may contain installation details.
  1. Refer to Battery Disconnect and Connect information.
  2. Refer to Engine Cover - 5.0L information.
  3. See figure
    GJ0025311
  4. Torque: 10 Nm
    GJ0025312
  5. Torque: 10 Nm
    GJ0025313
  6. See figure
    GJ0012517
  7. Torque: 18 Nm
    GJ0012518
  8. CAUTION: Do not attempt to clean the throttle body bore, build up of deposits reduces air leakage past the throttle plate at the fully closed position.
    NOTE: Clamp the hose to minimize coolant loss.
  9. See figure
    GJ0012519