LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2014 >> XK Base, 2D Coupe >> Repair and Diagnosis >> External Pages >> Different car >> Section 70 (Starting System (V8 5.0L Petrol/V8 S/C 5.0L Petrol)) >> Starting System (V8 5.0L Petrol/V8 S/C 5.0L Petrol) >> Diagnostic Procedures >> Starting System - Vehicles With: Smart Key >> Pinpoint Test >> Pinpoint Test C: Press Start And Brake - (Message Displayed)

Pinpoint Test C: Press Start And Brake - (Message Displayed)

WARNING: This page is about a different car, the 2011 Jaguar XKR, 2011 Jaguar XK, 2010 Jaguar XKR, and 2010 Jaguar XK. However, it is still accessible from the selected car via links, so may be relevant.
  1. C1: ENGINE FAILS TO CRANK 
    NOTE: Conditions for starting in addition to pressing the start button are
    NOTE: For automatic transmission vehicles, ensure the brake pedal is depressed and the park or neutral selected
    NOTE: If the engine can be heard to crank there is no fault with the smart key
    NOTE: If the locking pin is still engaged, turn the steering wheel to overcome the side load
    NOTE: Start authorization defined as Ignition functions, Steering column lock engagement, Engine immobilize and smart key authorization
    1. Check that there is sufficient brake pressure, (Automatic transmission only). Attempt another start making sure that the brake pedal is pressed firmly so the message is no longer displayed. In certain conditions this may require a more effort than usual

      2. Has the vehicle started? 

      YES:  No further action required

      NO:  Contact dealer technical support

scientia non olet · About LEMON Manuals