LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2014 >> XK Base, 2D Coupe >> Repair and Diagnosis >> External Pages >> Different car >> Section 7 (Wheels & Tires) >> Wheels And Tires >> Removal And Installation >> Tire Pressure Monitoring System Rear Antenna >> Installation

Tire Pressure Monitoring System Rear Antenna: Installation

WARNING: This page is about a different car, the 2011 Jaguar XKR, 2011 Jaguar XK, 2010 Jaguar XKR, and 2010 Jaguar XK. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the tire pressure antenna.
    • Install the clips.
    • Connect the electrical connector.
  2. Install the fender splash shield.
    • Tighten the Torx bolts.
  3. Install the wheel and tire assembly. See Wheel and Tire .
  4. Connect the battery ground cable. Refer to SPECIFICATIONS information.
scientia non olet · About LEMON Manuals