LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2014 >> XK Base, 2D Coupe >> Repair and Diagnosis >> External Pages >> Different car >> Section 69 (Engine (V8 5.0L Petrol)) >> Engine (V8 5.0L Petrol) >> Removal And Installation >> Oil Pan >> Installation

Oil Pan: Installation

WARNING: This page is about a different car, the 2011 Jaguar XK and 2010 Jaguar XK. However, it is still accessible from the selected car via links, so may be relevant.
    CAUTION: Make sure that the mating faces are clean and free of foreign material.
    • Apply RTV sealant WSE-M4G323-A6 (Loctite 5901G) to the areas shown, and tighten the bolts within 7 minutes.
      GJ0022908
    2. NOTE: Tighten the bolts in the indicated sequence.
  2. Torque: 12 Nm
    GJ0022909
  3. Refer to Engine Oil Level Sensor information.
scientia non olet · About LEMON Manuals