Intake Manifold: Removal
WARNING: This page is about a different car, the 2011 Jaguar XK and 2010 Jaguar XK. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Removal steps in this procedure may contain installation details.
- Refer to Battery Disconnect and Connect information.
- Raise and support the vehicle.
- Refer to Engine Cover - 5.0L information.
- Refer to Throttle Body information.
- See figure
- See figure
- Torque: 8 Nm
- See figure
- Torque: 8 Nm
- Torque: 25 Nm
- See figure
- Torque: 10 Nm
- Torque: 10 Nm
CAUTION:
Make sure that the mating faces are clean and free of foreign material.