Exhaust Manifold RH: Removal
WARNING: This page is about a different car, the 2011 Jaguar XK and 2010 Jaguar XK. However, it is still accessible from the selected car via links, so may be relevant.
- Refer to Battery Disconnect and Connect information.
- Raise and support the vehicle.
- Refer to Catalytic Converter RH information.
- Torque: 12 Nm
- Torque: 48 Nm
- Torque: 35
- Torque: 100 Nm
- See figure
- See figure
CAUTION:
Discard the bolt.
CAUTION:
Discard the bolts.
NOTE:
Discard the gasket.
NOTE:
Make sure that the position of the spacers is noted before removal of the manifold.
NOTE:
Do not disassemble further if the component is removed for access only.