Exhaust Manifold RH: Installation
WARNING: This page is about a different car, the 2011 Jaguar XK and 2010 Jaguar XK. However, it is still accessible from the selected car via links, so may be relevant.
- Torque: 45 Nm
- Install the special tool.
- Install the special tool.
- Torque: 10 Nm
- Remove the special tool.
- Torque: 10 Nm
- Torque: 18 Nm
- See figure
- Torque: 12 Nm
- Torque: 48 Nm
- Torque: 35 Nm
- Torque: 100 Nm
- Refer to Catalytic Converter RH information.
- Refer to Battery Disconnect and Connect information.
NOTE:
Install a new gasket.
NOTE:
If a new cylinder head is installed use the special tools in the illustration.
CAUTION:
Make sure that new bolts are installed.
NOTE:
Install the spacers in the noted position.
CAUTION:
Make sure that new bolts are installed.
NOTE:
Install the spacers in the noted position.
CAUTION:
Discard the bolt.