LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2014 >> XK Base, 2D Coupe >> Repair and Diagnosis >> External Pages >> Different car >> Section 68 (Steering Column Switches) >> Steering Column Switches >> Removal And Installation >> Steering Column MULTIFUNCTION Switch RH >> Removal

Steering Column MULTIFUNCTION Switch RH: Removal

WARNING: This page is about a different car, the 2011 Jaguar XKR, 2011 Jaguar XK, 2010 Jaguar XKR, and 2010 Jaguar XK. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the cover and disconnect the battery ground cable. Refer to Specifications information.
  2. Make the SRS system safe. Refer to General Service Information information.
  3. Remove the instrument panel, lower trim panel. Refer to Instrument Panel Lower Trim Panel information.
  4. Remove the steering column lower cowl.
    • Remove the 2 screws.
    • If installed, disconnect the steering column and foot pedal control switch electrical connector.
      GJ0003023
  5. Remove the steering column upper cowl.
    • Remove the 3 screws.
      GJ0003024
  6. Remove the steering column multifunction switch.
    • Disconnect the electrical connector.
    • Depress the 2 clips.
      GJ0009995