LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2014 >> XK Base, 2D Coupe >> Repair and Diagnosis >> External Pages >> Different car >> Section 68 (Steering Column Switches) >> Steering Column Switches >> Removal And Installation >> Steering Column MULTIFUNCTION Switch RH >> Installation

Steering Column MULTIFUNCTION Switch RH: Installation

WARNING: This page is about a different car, the 2011 Jaguar XKR, 2011 Jaguar XK, 2010 Jaguar XKR, and 2010 Jaguar XK. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the multifunction switch.
    • Align the lugs and secure the clips.
    • Connect the electrical connector.
  2. Install the steering column upper cowl.
    • Install the screws.
  3. Install the steering column lower cowl.
    • If installed, connect the steering column and foot pedal switch electrical connector.
    • Secure in the clips.
    • Install the screws.
  4. Install the instrument panel, lower trim panel. Refer to Instrument Panel Lower Trim Panel information.
  5. Connect the battery ground cable and install the cover. Refer to Specifications information.
scientia non olet · About LEMON Manuals