Steering Gear Boot: Removal
WARNING: This page is about a different car, the 2011 Jaguar XKR, 2011 Jaguar XK, 2010 Jaguar XKR, and 2010 Jaguar XK. However, it is still accessible from the selected car via links, so may be relevant.
- Raise and support the vehicle.
- Remove the tie-rod end. Refer to See Tie Rod End - 5.0L .
- Remove the locknut.
- Remove the steering gear boot.
WARNING:
Do not work on or under a vehicle supported only by a jack. Always support the vehicle on safety stands.
NOTE:
Note the fitted position.
NOTE:
Clean the components general area prior to dismantling.