LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2014 >> XK Base, 2D Coupe >> Repair and Diagnosis >> External Pages >> Different car >> Section 65 (Speed Control) >> Speed Control (V8 5.0L Petrol/V8 S/C 5.0L Petrol) >> Removal And Installation >> Speed Control Sensor >> Removal

Speed Control Sensor: Removal

WARNING: This page is about a different car, the 2011 Jaguar XKR, 2011 Jaguar XK, 2010 Jaguar XKR, and 2010 Jaguar XK. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Removal steps in this procedure may contain installation details.
  1. Refer to Battery Disconnect and Connect information.
    2. WARNING: Make sure to support the vehicle with axle stands.
  2. Raise and support the vehicle.
  3. Refer to Front Bumper Cover information.
  4. See Speed Control Sensor Adjustment . .
    5. CAUTION: Make sure that all diagnostic trouble codes (DTCs) have been removed after the road test.
    CAUTION: Do not remove the speed control sensor adjustment stud lock nut.
    NOTE: Make sure that the sensor is aligned after installation as described in the speed control sensor adjustment procedure.
  5. Torque: 5 Nm.
    GJ0025618
scientia non olet · About LEMON Manuals