LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2014 >> XK Base, 2D Coupe >> Repair and Diagnosis >> External Pages >> Different car >> Section 65 (Speed Control) >> Speed Control (V8 5.0L Petrol/V8 S/C 5.0L Petrol) >> Diagnostic Procedures >> Speed Control >> Inspection And Verification

Inspection And Verification

WARNING: This page is about a different car, the 2011 Jaguar XKR, 2011 Jaguar XK, 2010 Jaguar XKR, and 2010 Jaguar XK. However, it is still accessible from the selected car via links, so may be relevant.
  1. Verify the customer concern.
  2. Visually inspect for obvious signs of damage and system integrity.
    VISUAL INSPECTION

    Mechanical Electrical
    • Speed control sensor
    • Ensure the speed control sensor is free from obstructions
    • Speed control module
    • Fuses
    • Wiring harness
    • Electrical connector(s)
    • Steering wheel switches
    • Brake switch
    • Speed control sensor
    • Speed control module
    • Engine Control Module (ECM)
  3. If an obvious cause for an observed or reported concern is found, correct the cause (if possible) before proceeding to the next step.
  4. If the cause is not visually evident, verify the symptom and refer to the Symptom Chart, alternatively, check for Diagnostic Trouble Codes (DTCs) and refer to the DTC Index.