LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2014 >> XK Base, 2D Coupe >> Repair and Diagnosis >> External Pages >> Different car >> Section 64 (Power Brake Actuation) >> Power Brake Actuation >> Removal And Installation >> Brake Booster - RHD RWD >> Installation

Brake Booster - RHD RWD: Installation

WARNING: This page is about a different car, the 2011 Jaguar XKR, 2011 Jaguar XK, 2010 Jaguar XKR, and 2010 Jaguar XK. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install new gaskets.
  2. Install the brake booster.
    • Tighten the nuts to 25 Nm (18 lb.ft).
    • Install the brake pedal clevis pin.
  3. Connect the vacuum hose.
  4. Install the brake switch.
  5. Install the driver's side footwell trim panel.
    • Carefully align and secure the clips.
  6. Install the brake master cylinder. Refer to Brake Master Cylinder - RHD information.
scientia non olet · About LEMON Manuals