Parking Brake Module - Vehicles With: Carbon Ceramic Brakes (2013, 2014, 2015): Installation
WARNING: This page is about a different car, the 2011 Jaguar XKR, 2011 Jaguar XK, 2010 Jaguar XKR, and 2010 Jaguar XK. However, it is still accessible from the selected car via links, so may be relevant.
- Install the parking brake module.
- Tighten the nuts to 4 Nm (3 lb.ft).
- Connect the electrical connectors.
- Secure the auxiliary junction box mounting bracket.
- Tighten the nuts to 10 Nm (7 lb.ft).
- Install the rear seat backrest. Refer to Rear Seat Backrest information.
- Connect the battery ground cable and install the cover. Refer to Specifications information.