LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2014 >> XK Base, 2D Coupe >> Repair and Diagnosis >> External Pages >> Different car >> Section 61 (Rear Disc Brake) >> Rear Disc Brake >> Removal And Installation >> Brake Pads Vehicles With: Standard Brakes >> Installation

Brake Pads Vehicles With: Standard Brakes: Installation

WARNING: This page is about a different car, the 2011 Jaguar XKR, 2011 Jaguar XK, 2010 Jaguar XKR, and 2010 Jaguar XK. However, it is still accessible from the selected car via links, so may be relevant.
    NOTE: The brake pad wear sensor retaining tang must be installed to the sensor prior to installation to the brake pad.
  1. See figure
    GJ0022551
  2. To install, reverse the removal procedure.
  3. Repeat the above procedure on the opposite side.