LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2014 >> XK Base, 2D Coupe >> Repair and Diagnosis >> External Pages >> Different car >> Section 58 (Brake System - General Information) >> Brake System - General Information >> General Procedures >> Brake System Bleeding (70.25.03) - Vehicles With: Carbon Ceramic Brakes >> Bleeding

Brake System Bleeding (70.25.03) - Vehicles With: Carbon Ceramic Brakes: Bleeding

WARNING: This page is about a different car, the 2011 Jaguar XKR, 2011 Jaguar XK, 2010 Jaguar XKR, and 2010 Jaguar XK. However, it is still accessible from the selected car via links, so may be relevant.
  1. Connect the approved diagnostic tool to the vehicle, select diagnostic and proceed as directed for bleeding the brake system.
    2. NOTE: The assistance of another technician will be required.
  2. Follow the on screen prompts to bleed the brake system.
    3. WARNING: Do not allow dirt or foreign liquids to enter the reservoir. Use only new brake fluid of the correct specification from airtight containers. Do not mix brands of brake fluid as they may not be compatible.
  3. Fill the brake fluid reservoir to the MAX mark.
scientia non olet · About LEMON Manuals