Pinpoint Test H: BRAKE LOCKUP DURING LIGHT BRAKE PEDAL FORCE
- TEST BRAKE LOCKUP
- Road test the vehicle and apply the brake pedal lightly.
Do the brakes lockup?
YES: Go to step 2.
NO: Vehicle is OK.
- INSPECT BRAKE PADS
- Inspect brake pads for contamination, correct installation, damage and type.
Are any concerns found?
YES: INSTALL the front brake pads correctly or INSTALL new front brake pads if necessary. Refer to Brake Pads - Vehicles With: Standard Brakes information. INSTALL the rear brake pads correctly or INSTALL new rear brake pads if necessary and Brake Pads - Vehicles With: Standard Brakes information. TEST the system for correct operation.
NO: Go to step 3.
- INSPECT BRAKE CALIPERS
- Inspect brake calipers for binding, leaking or sticking.
Are any concerns found?
YES: INSTALL the brake calipers correctly or INSTALL new brake calipers as necessary. Refer to Brake Caliper - Vehicles With: Standard Brakes information. Refer to Brake Caliper - Vehicles With: Standard Brakes information. TEST the system for normal operation.
NO: Vehicle is OK.