LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2014 >> XK Base, 2D Coupe >> Repair and Diagnosis >> External Pages >> Different car >> Section 57 (Suspension System - General Information) >> Suspension System - General Information >> Diagnostic Procedures >> Suspension System >> Inspection And Verification

Inspection And Verification

WARNING: This page is about a different car, the 2011 Jaguar XKR, 2011 Jaguar XK, 2010 Jaguar XKR, and 2010 Jaguar XK. However, it is still accessible from the selected car via links, so may be relevant.
  1. Verify the customer's concern by carrying out a road test on a smooth road. If any vibrations are apparent, refer to Noise, Vibration and Harshness (NVH) information.
  2. Visually inspect for obvious signs of damage and system integrity.
    VISUAL INSPECTION CHART

    Mechanical
    • Damaged tires
    • Wheel bearing(s)
    • Loose or damaged front or rear suspension components
    • Loose, damaged or missing suspension fastener(s)
    • Incorrect spring usage
    • Damaged or sagging spring(s)
    • Damaged or leaking shock absorber(s)
    • Damaged or leaking strut(s)
    • Worn or damaged suspension bushing(s)
    • Loose, worn or damaged steering system components
    • Damaged axle components
  3. If an obvious cause for an observed or reported condition is found, correct the cause (if possible) before proceeding to the next step.
  4. If the fault is not visually evident, verify the symptom and refer to the following Symptom Chart.