LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2014 >> XK Base, 2D Coupe >> Repair and Diagnosis >> External Pages >> Different car >> Section 53 (Uni-Body, SUBFRAME & Mounting System) >> Uni-Body, SUBFRAME And Mounting System >> Removal And Installation >> Rear SUBFRAME Rear Bushing >> Installation

Rear SUBFRAME Rear Bushing: Installation

WARNING: This page is about a different car, the 2011 Jaguar XKR, 2011 Jaguar XK, 2010 Jaguar XKR, and 2010 Jaguar XK. However, it is still accessible from the selected car via links, so may be relevant.

    All vehicles 

    NOTE: Align to the position noted on removal.
  1. Using the special tools, Install the new rear bushings.
    GJ0004570

    2. Vehicles with 4.2L engine 

  2. Install the rear subframe. Refer to Rear Subframe - 4.2L . .

    3. Vehicles with 5.0L engine 

  3. Install the rear subframe. Refer to Rear Subframe - 5.0L .

    4. All vehicles 

  4. Connect the battery ground cable. Refer to Specifications information.
scientia non olet · About LEMON Manuals