Stabilizer Bar Link Bushing: Removal
WARNING: This page is about a different car, the 2011 Jaguar XKR, 2011 Jaguar XK, 2010 Jaguar XKR, and 2010 Jaguar XK. However, it is still accessible from the selected car via links, so may be relevant.
- Raise and support the vehicle.
- Remove the LH lower arm. See Rear Lower Arm .
- Using the special tools, remove and discard the stabilizer bar link bushing.
WARNING:
Do not work on or under a vehicle supported only by a jack. Always support the vehicle on safety stands.