LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2014 >> XK Base, 2D Coupe >> Repair and Diagnosis >> External Pages >> Different car >> Section 52 (Front Suspension) >> Front Suspension >> Removal And Installation >> Shock Absorber Bushing >> Installation

Shock Absorber Bushing: Installation

WARNING: This page is about a different car, the 2011 Jaguar XKR, 2011 Jaguar XK, 2010 Jaguar XKR, and 2010 Jaguar XK. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the bushing into the special tool.
    GJ0004089
    2. NOTE: Align to the position noted on removal.
  2. Using the special tools, install the shock absorber bushing.
    GJ0004090
  3. Install the lower suspension arm. See Rear Lower Arm .
scientia non olet · About LEMON Manuals