LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2014 >> XK Base, 2D Coupe >> Repair and Diagnosis >> External Pages >> Different car >> Section 52 (Front Suspension) >> Front Suspension >> Removal And Installation >> Front Shock Absorber >> Installation

Front Shock Absorber: Installation

WARNING: This page is about a different car, the 2011 Jaguar XKR, 2011 Jaguar XK, 2010 Jaguar XKR, and 2010 Jaguar XK. However, it is still accessible from the selected car via links, so may be relevant.
    CAUTION: Make sure that these components are installed to the noted removal position.
  1. Torque: 27 Nm
    GJ0025352
  2. See figure
    GJ0025351
  3. See figure
    GJ0025350
  4. See figure
    GJ0025349
  5. Torque: 27 Nm
    GJ0025348
  6. See figure
    GJ0025347
  7. Torque: 175 Nm
    GJ0025346
    • Torque:

    • Stage 1: 60 Nm
    • Stage 2: 135°
      GJ0025345
  8. Torque: 90 Nm
    GJ0025344
  9. See figure
    GJ0025343
  10. NOTE: Use an additional wrench to prevent the ball joint rotating.
    1. Torque: 43 Nm
    2. Torque: 70 Nm
      GJ0025342
  11. Refer to Wheel and Tire information.