LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2014 >> XK Base, 2D Coupe >> Repair and Diagnosis >> External Pages >> Different car >> Section 51 (Air Conditioning) >> Air Conditioning >> Removal And Installation >> Receiver Drier >> Removal

Receiver Drier: Removal

WARNING: This page is about a different car, the 2011 Jaguar XKR, 2011 Jaguar XK, 2010 Jaguar XKR, and 2010 Jaguar XK. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Removal steps in this procedure may contain installation details.
    WARNING: Make sure to support the vehicle with axle stands.
  1. Raise and support the vehicle.
  2. Refer to Air Conditioning (A/C) System Recovery, Evacuation and Charging information.
  3. Refer to Radiator Splash Shield information.
  4. See figure.
    GJ0025280
    5. NOTE: Some variation in the illustrations may occur, but the essential information is always correct.
  5. Torque: 12 Nm.
    GJ0023344
    6. NOTE: Some variation in the illustrations may occur, but the essential information is always correct.
  6. See figure.
    GJ0023345
scientia non olet · About LEMON Manuals