LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2014 >> XK Base, 2D Coupe >> Repair and Diagnosis >> External Pages >> Different car >> Section 5 (Noise, Vibration & Harshness) >> Noise, Vibration And Harshness >> Diagnostic Procedures >> Noise, Vibration And Harshness (NVH) >> Leakage Conditions

Leakage Conditions

WARNING: This page is about a different car, the 2011 Jaguar XKR, 2011 Jaguar XK, 2010 Jaguar XKR, and 2010 Jaguar XK. However, it is still accessible from the selected car via links, so may be relevant.
  1. Inspect the CV joint boots for evidence of cracks, tears or splits.
  2. Inspect the underbody for any indication of grease splatter in the vicinity of the rear drive half shaft, outboard and inboard CV joint boot locations, which is an indication of CV joint boot or CV joint boot clamp damage.
  3. Inspect the inboard CV joint bearing housing seal for leakage.