LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2014 >> XK Base, 2D Coupe >> Repair and Diagnosis >> External Pages >> Different car >> Section 47 (Bumpers) >> Bumpers >> Removal And Installation >> Rear Bumper >> Installation

Rear Bumper: Installation

WARNING: This page is about a different car, the 2011 Jaguar XKR, 2011 Jaguar XK, 2010 Jaguar XKR, and 2010 Jaguar XK. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the 2 crush tubes.
    • Tighten the nuts to 25 Nm (18 lb.ft).
  2. With assistance, install the bumper.
    • Tighten the M8 bolts to 25 Nm (18 lb.ft).
  3. Install the rear bumper cover. See Rear Bumper Cover .
scientia non olet · About LEMON Manuals