LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2014 >> XK Base, 2D Coupe >> Repair and Diagnosis >> External Pages >> Different car >> Section 45 (Convertible Top) >> Convertible Top >> Removal And Installation >> Convertible Top Striker >> Removal

Convertible Top Striker: Removal

WARNING: This page is about a different car, the 2011 Jaguar XKR, 2011 Jaguar XK, 2010 Jaguar XKR, and 2010 Jaguar XK. However, it is still accessible from the selected car via links, so may be relevant.
  1. Open the convertible top.
  2. Remove the header rail upper trim panel. See Header Rail Upper Trim Panel .
  3. Remove the header rail.
    • Remove the 6 screws.
      GJ0010482
  4. Remove the convertible to latch striker.
    • Remove the 2 Torx bolts.
    • Release the electrical harness clip.
    • Disconnect the electrical connector.
      GJ0010483
scientia non olet · About LEMON Manuals