LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2014 >> XK Base, 2D Coupe >> Repair and Diagnosis >> External Pages >> Different car >> Section 45 (Convertible Top) >> Convertible Top >> Removal And Installation >> Convertible Top Latch >> Installation

Convertible Top Latch: Installation

WARNING: This page is about a different car, the 2011 Jaguar XKR, 2011 Jaguar XK, 2010 Jaguar XKR, and 2010 Jaguar XK. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the convertible top latch assembly.
    • Attach the drive cable.
    • Tighten the nuts to 10 Nm (7 lb.ft).
    • Connect the electrical connector.
  2. Attach the convertible top locking mechanism rod.
    • Install the retaining clip.
  3. Install the header rail upper trim panel. See Header Rail Upper Trim Panel .
scientia non olet · About LEMON Manuals