LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2014 >> XK Base, 2D Coupe >> Repair and Diagnosis >> External Pages >> Different car >> Section 45 (Convertible Top) >> Convertible Top >> Removal And Installation >> Convertible Top Compartment Lid Molding >> Installation

Convertible Top Compartment Lid Molding: Installation

WARNING: This page is about a different car, the 2011 Jaguar XKR, 2011 Jaguar XK, 2010 Jaguar XKR, and 2010 Jaguar XK. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the convertible top compartment molding.
    • Tighten the nuts to 4 Nm (3 lb.ft).
  2. Install the convertible top compartment lid pad.
    • Secure with the clips.
  3. Install the convertible top compartment lid buffers.
    • Release the clips.
    • Secure in the clips.
  4. Close the convertible top compartment lid.
    • Remove the support.
    • Depress the switch.
scientia non olet · About LEMON Manuals