LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2014 >> XK Base, 2D Coupe >> Repair and Diagnosis >> External Pages >> Different car >> Section 45 (Convertible Top) >> Convertible Top >> Removal And Installation >> Convertible Top Compartment Lid Latch >> Installation

Convertible Top Compartment Lid Latch: Installation

WARNING: This page is about a different car, the 2011 Jaguar XKR, 2011 Jaguar XK, 2010 Jaguar XKR, and 2010 Jaguar XK. However, it is still accessible from the selected car via links, so may be relevant.
  1. Attach the convertible top latch release cable.
    • Tighten the Torx bolt.
    • Install the clip.
  2. Secure the convertible top lid position switch.
    • Attach the switch.
    • Tighten the Torx bolts.
  3. Secure the convertible top lid latch.
    • Tighten the bolts to 10 Nm (7 lb.ft).
    4. NOTE: Support as necessary.
  4. Close the convertible top compartment lid.
scientia non olet · About LEMON Manuals