LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2014 >> XK Base, 2D Coupe >> Repair and Diagnosis >> External Pages >> Different car >> Section 39 (Anti-Theft - Active) >> Anti-Theft - Active >> Removal And Installation >> Anti-Theft Alarm Horn >> Installation

Anti-Theft Alarm Horn: Installation

WARNING: This page is about a different car, the 2011 Jaguar XKR, 2011 Jaguar XK, 2010 Jaguar XKR, and 2010 Jaguar XK. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the anti-theft alarm horn.
    • Connect the electrical connector.
    • Tighten the nuts to 10 Nm (7 lb.ft).
  2. Install the pedestrian protection actuator and bracket.
    • Connect the electrical connector.
  3. Secure the pedestrian protection actuator bracket.
    • Attach the wiring harness clips.
    • Tighten the bolts to 8 Nm (6 lb.ft).
  4. Install the air intake cover.
    • Install the 3 clips.
scientia non olet · About LEMON Manuals