LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2014 >> XK Base, 2D Coupe >> Repair and Diagnosis >> External Pages >> Different car >> Section 37 (Handles, Locks, Latches & Entry Systems) >> Handles, Locks, Latches And Entry Systems >> Removal And Installation >> Luggage Compartment Lid Lock Cylinder >> Installation

Luggage Compartment Lid Lock Cylinder: Installation

WARNING: This page is about a different car, the 2011 Jaguar XKR, 2011 Jaguar XK, 2010 Jaguar XKR, and 2010 Jaguar XK. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the luggage compartment lid lock cylinder.
    • Install the bolt.
    • Tighten the Torx bolt to 3 Nm (2 lb.ft).
  2. Connect the luggage compartment lid latch operating cable to the lock cylinder.
    • Install the cable.
  3. Remove the luggage compartment lid trim panel.
scientia non olet · About LEMON Manuals