LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2014 >> XK Base, 2D Coupe >> Repair and Diagnosis >> External Pages >> Different car >> Section 37 (Handles, Locks, Latches & Entry Systems) >> Handles, Locks, Latches And Entry Systems >> Removal And Installation >> Luggage Compartment Lid Latch Actuator >> Installation

Luggage Compartment Lid Latch Actuator: Installation

WARNING: This page is about a different car, the 2011 Jaguar XKR, 2011 Jaguar XK, 2010 Jaguar XKR, and 2010 Jaguar XK. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the luggage compartment lid latch assembly.
    • Install the 3 Torx bolts.
    • Connect the electrical connector.
    • Tighten the bolts to 20 Nm (15 lb.ft).
  2. Connect the luggage compartment lid latch operating cable to the lock cylinder.
    • Install the cable.
  3. Install the luggage compartment lid trim panel.
scientia non olet · About LEMON Manuals