LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2014 >> XK Base, 2D Coupe >> Repair and Diagnosis >> External Pages >> Different car >> Section 37 (Handles, Locks, Latches & Entry Systems) >> Handles, Locks, Latches And Entry Systems >> Removal And Installation >> Liftgate Lock Cylinder >> Removal

Liftgate Lock Cylinder: Removal

WARNING: This page is about a different car, the 2011 Jaguar XKR, 2011 Jaguar XK, 2010 Jaguar XKR, and 2010 Jaguar XK. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the liftgate lower trim panel. Refer to Liftgate Lower Trim Panel information.
  2. Remove the liftgate lock cylinder.
    • Remove the Torx screw.
    • Release the liftgate lock cylinder cable.
    • Remove the liftgate lock cylinder housing.
    GJ0009035
scientia non olet · About LEMON Manuals