LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2014 >> XK Base, 2D Coupe >> Repair and Diagnosis >> External Pages >> Different car >> Section 37 (Handles, Locks, Latches & Entry Systems) >> Handles, Locks, Latches And Entry Systems >> Removal And Installation >> Liftgate Lock Cylinder >> Installation

Liftgate Lock Cylinder: Installation

WARNING: This page is about a different car, the 2011 Jaguar XKR, 2011 Jaguar XK, 2010 Jaguar XKR, and 2010 Jaguar XK. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the liftgate lock cylinder.
    • Install the liftgate lock cylinder housing.
    • Fit and tighten the Torx screw.
    • Attach the liftgate lock cylinder cable.
  2. Install the liftgate lower trim panel. Refer to Liftgate Lower Trim Panel information.
scientia non olet · About LEMON Manuals