LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2014 >> XK Base, 2D Coupe >> Repair and Diagnosis >> External Pages >> Different car >> Section 37 (Handles, Locks, Latches & Entry Systems) >> Handles, Locks, Latches And Entry Systems >> Removal And Installation >> Liftgate Latch Actuator >> Installation

Liftgate Latch Actuator: Installation

WARNING: This page is about a different car, the 2011 Jaguar XKR, 2011 Jaguar XK, 2010 Jaguar XKR, and 2010 Jaguar XK. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the liftgate latch.
    • Tighten the bolts to 10 Nm (7 lb.ft).
    • Connect the electrical connector.
    • Attach the liftgate latch cable.
  2. Install the liftgate lower trim panel. Refer to Liftgate Lower Trim Panel information.
scientia non olet · About LEMON Manuals